QUICK START QUIDE

Step 1

Unpack the wooden box

The machine is packed in a thick wooden box sealed by easy-to-open clips, which can protect the machine well and keep you safe while you are unboxing the wooden case. Moreover, the wooden box can be reused.
Quick Start Guide

Step 2

Quick Start Guide

Assemble the machine

We have adjusted the parameters and tension of the machine to the best condition before the machine leaves the factory. All you need to do is to assemble the machine stand and place the machine head on the stand.

Assembling the machine

Before the machine leaves the factory, we have adjusted the parameters and tension of the machine to the best condition. All you need to do is to assemble the machine stand and place the head on the stand.
Quick Start Guide

Step 3

Refuel and maintenance

Please oil the machine before you start to use it. Moreover, daily maintenance is essential during your use to keep the machine longer in use.
Quick Start Guide

Step 4

Quick Start Guide

Raise the spool frame

It is a simple move with a hex wrench ( size 2.5), just need to loose the two hex screws on the two support rods, the two screws are locking two pieces of rods at the joint, after loosening them, the rods can extend and your frame is able to lift up and down. After the rods are up to the shoulder, time to lock the screws back and then it is done.
There are 3 advantages to raise up your spool frame:
1-Less thread breakage
2-Prevention of thread twisting
3-Keep thread away from your spool seat.

Raising the thread holder

Some users neglect to raise the embroidery thread holder during use, which sometimes makes the thread breakage rate increase. Please raise the thread holder before starting embroidery.
Quick Start Guide

Step 5

 Quick threading

Usually you do not need to re-thread from scratch. Don’t pull the string out that comes with the machine. Make a nut with your thread spool and the piece of thread make sure is tight and then pull the thread from the front panel torse the needle. Then check that all threads are correct.
Quick Start Guide

Step 6

Quick Start Guide

Replace the bobbin

You need to check the bobbin thread and replace it with a new one. You can use aluminum bobbins, plastic bobbins, disposable bobbins, etc. After doing the above preparations, you can start your embroidery.

Replacing the bobbin

You need to check the bobbin thread and replace it with a new one. You can use aluminum bobbins, plastic bobbins, disposable bobbins, etc. After doing the above preparations, you can start your embroidery.
Quick Start Guide

Start your embroidery journey with BAI

Rely on BAI, countless embroidery shops start their embroidery business from 0 to 1, becoming shop owners & going on benefits journey.

More Information? Click to Check

Home Page
Support Page

LEARN MORE 

STILL HAVE QUESTIONS? JUST LEAVE YOUR MESSAGE!

 

ADDRESS

16th Floor, Wisdom Building,990 Jianghai West Road, Wuxi City, Jiangsu 214000, China

EMAIL

louisa@ebaima.com

Error: Contact form not found.